Laser technology is primarily used for the processing of metals and organic substances such as wood, plastic and rubber.
An increase of the perfection and productivity in the results of the laser technology regularly causes a large output of environmental pollutants-very common in sub-micro size. This has an impact on the health of the employee and the function of the machine. Tries to avoid this we must. Therefore, there is a technology that allows for an absolute dust extraction and separation.
Keller Lufttechnik Benelux cv here can provide a solution with its range of ontstoffingsystemen. These devices have filter elements that the BIA test certificate (ZH 1/487) carry, for the efficient filtration of the finest dust parts. This makes it possible to bring in the filtered air recirculation in the workshop.
During the different phases of the casting, there are large fabric developments and toxic gases. Keller Lufttechnik can with her wide range of ontstoffings and extraction systems offer a solution for every problem.
The casting process is done in three major phases:
- The sand preparation can be done by Keller: conveyor belts, Seven, mixers, silos, etc..
- The casting process consisting of: 1. melt towers: At the melting of ores and scrap metal vapours and dust-free, which come in specific filter installations be separated. 2. Casting: when casting creates fumes and dust, which should be extracted. 3. cooling and demoulding: during the cooling of the exhaust gas must be sucked off the cast form boxes. Especially when demoulding, account must be taken of an excess of vapor.
- During the different phases of the polishing process:-Preparation-Beam room exterior controls-Beam room control-rotary table, drum machine, multifunctional polishing machine-Halfcabine-sharpening room-large amounts of dust free flinger machine. These need to be extracted with work cubicles and extraction installations